Reason about flight forces, speed-dependent loads and mass balance.
Free · No sign-in required3 lessonsWorked examples & practiceBeginner
0 of 3 lessons checked · Progress is saved in this browser.
01 / SYSTEM VIEWForces
02 / SYSTEM VIEWMotion
03 / SYSTEM VIEWStability and control
This map connects the course ideas; it is not a detailed engineering schematic.
LESSON 1 / 3 · FREE
Four forces of flight
Your goal: Use the stated flight condition before balancing forces.
Understand the idea
Lift, weight, thrust and drag describe different force roles. In steady, straight, level flight, the appropriate vertical and horizontal components balance. During acceleration, climb or turning, simple equalities may no longer hold. Lift is not always equal to weight in every maneuver.
Worked example
For an ideal steady level example with weight 10 kN and horizontal thrust 2 kN, corresponding lift is 10 kN and drag is 2 kN.
Try it yourself
In that same ideal condition, weight is 12 kN. What lift balances it?
Your goal: Recognize the square dependence on speed.
Understand the idea
Dynamic pressure is one-half density times speed squared. Aerodynamic force also depends on area and an appropriate coefficient. Doubling speed at unchanged density quadruples dynamic pressure; coefficients may themselves change with condition, so the resulting aircraft behavior needs a fuller model.
Worked example
At supplied density 1.2 kg/m³ and speed 10 m/s, q = 0.5 × 1.2 × 100 = 60 Pa.
Try it yourself
Use density 1.2 kg/m³ and speed 20 m/s. Find dynamic pressure.
Your goal: Calculate a one-dimensional mass-center example.
Understand the idea
A center-of-mass calculation weights each position by its mass relative to a defined datum. Moving mass changes the balance even if total mass stays constant. An arithmetic example does not define a permissible loading envelope, stability margin or flight authorization.
Worked example
Two equal 10 kg masses at 0 m and 2 m have center at (10×0 + 10×2)/20 = 1 m.
Try it yourself
Two equal masses are placed at 1 m and 5 m. Find their combined center position.
Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.
Practice progress is a study aid, not a professional qualification or proof of field competence.
Continue in Aerospace Engineering
Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.
These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.
Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.