Trace loads, average stress and deflection through idealized structural models.
Free · No sign-in required3 lessonsWorked examples & practiceBeginner
0 of 3 lessons checked · Progress is saved in this browser.
01 / SYSTEM VIEWApplied loads
02 / SYSTEM VIEWMembers and connections
03 / SYSTEM VIEWFoundations
This map connects the course ideas; it is not a detailed engineering schematic.
LESSON 1 / 3 · FREE
Load paths and reactions
Your goal: Follow a load to its supporting reactions.
Understand the idea
A load path connects the point where load enters a structure to its supports and ground. For a stationary ideal beam, vertical forces and moments balance. Support type matters: a pin and roller do not restrain every possible movement. Connections are part of the load path.
Worked example
A simply supported beam with a centered 10 kN point load has 5 kN reaction at each end by symmetry and equilibrium. Beam self-weight is omitted.
Try it yourself
A centered 16 kN point load acts on the same ideal support arrangement. Find either vertical reaction.
Average axial stress is axial force divided by cross-sectional area. It is not a complete stress state at holes, connections or bends. Strength checks require material properties, load combinations and other failure modes; a single average stress calculation does not establish structural adequacy.
Worked example
A 20,000 N axial force on 200 mm² gives 100 N/mm² = 100 MPa. This is average direct stress, not a bending calculation.
Try it yourself
Find average axial stress for 30,000 N on 300 mm².
Strength concerns resistance to failure; stiffness concerns deformation under load. For an ideal linear spring, F = kδ. Structural deflections depend on geometry, material stiffness and boundary conditions. A member can satisfy one limit while failing another, such as excessive deflection.
Worked example
A teaching spring with k = 200 N/mm deflects 2 mm under 400 N. Doubling load doubles deflection only while the linear model remains valid.
Try it yourself
At k = 150 N/mm, what deflection does 450 N produce?
Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.
Practice progress is a study aid, not a professional qualification or proof of field competence.
Continue in Civil & Structural
Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.
These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.
Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.