START WITH THE FOUNDATIONS

Fire Suppression Foundations

Connect detection-independent sprinkler operation, flow demand and supply pressure.

Free · No sign-in required3 lessonsWorked examples & practiceBeginner

0 of 3 lessons checked · Progress is saved in this browser.

  1. 01 / SYSTEM VIEWWater supply
  2. 02 / SYSTEM VIEWDistribution piping
  3. 03 / SYSTEM VIEWDischarge devices

This map connects the course ideas; it is not a detailed engineering schematic.

LESSON 1 / 3 · FREE

System functions and boundaries

Your goal: Identify how a conventional wet-pipe sprinkler system operates.

Understand the idea

In a conventional wet-pipe system, piping contains water and heat operates individual sprinklers. A fire alarm system can monitor waterflow and valve conditions, but ordinary sprinklers are not all opened electrically by smoke detection. Other system types have different operating sequences.

Worked example

A fictional drawing has 12 sprinklers on one branch and 8 on another. There are 20 installed sprinklers; that count is not a hydraulic design area or simultaneous demand.

Try it yourself

Count installed sprinklers on branches containing 9 and 7 devices.

What operates a typical heat-responsive sprinkler?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 2: Density and supplied design area →

LESSON 2 / 3 · FREE

Density and supplied design area

Your goal: Calculate a conceptual flow from supplied density and area.

Understand the idea

A density-area product is a useful introduction to hydraulic demand. Here the density and area are fictional inputs, not required design criteria. Real protection selection depends on hazards, adopted standards, geometry, listed equipment and other allowances. Installed head count alone does not establish the calculation.

Worked example

Using a supplied 4 L/min/m² over 100 m² gives 400 L/min. This intentionally excludes hose allowances and detailed discharge distribution.

Try it yourself

Using supplied teaching values of 5 L/min/m² over 80 m², find the product.

Where should actual design criteria come from?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 3: Pressure and flow are different →

LESSON 3 / 3 · FREE

Pressure and flow are different

Your goal: Separate available pressure from delivered flow.

Understand the idea

Flow measures volume per time; pressure relates force to area. A supply may have high static pressure yet insufficient pressure at the required flow after elevation and friction losses. Hydraulic analysis compares demand with a supply characteristic rather than treating a single pressure reading as capacity.

Worked example

A fictional supply provides 600 kPa at a stated flow. If modeled elevation and friction use 150 kPa, 450 kPa remains at the defined downstream boundary.

Try it yourself

From 500 kPa, subtract 120 kPa of supplied modeled losses.

Does a static pressure alone establish available flow?

Background reference ↗ · Original teaching text and fictional practice values.

Choose your next step →

Finish with evidence of your understanding.

Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.

Practice progress is a study aid, not a professional qualification or proof of field competence.

Continue in Fire Suppression

Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.

Open the full studio → · Choose another discipline →

About this introductory course

These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.

Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.