START WITH THE FOUNDATIONS

Materials Science Foundations

Connect material properties, stress and selection tradeoffs.

Free · No sign-in required3 lessonsWorked examples & practiceBeginner

0 of 3 lessons checked · Progress is saved in this browser.

  1. 01 / SYSTEM VIEWService requirements
  2. 02 / SYSTEM VIEWMaterial behavior
  3. 03 / SYSTEM VIEWSelection evidence

This map connects the course ideas; it is not a detailed engineering schematic.

LESSON 1 / 3 · FREE

Properties and selection

Your goal: Choose properties for a specified function rather than a material reputation.

Understand the idea

Density, stiffness, strength, corrosion resistance and manufacturing behavior answer different questions. A suitable selection starts with constraints and loading conditions. A material that is light or strong in one test is not automatically suitable for every environment, geometry or manufacturing process.

Worked example

A solid 0.002 m³ component made from supplied density 2,700 kg/m³ has mass 5.4 kg. Density alone says nothing about whether its strength is adequate.

Try it yourself

At supplied density 8,000 kg/m³ and volume 0.001 m³, find mass.

What should begin a material comparison?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 2: Stress and elastic strain →

LESSON 2 / 3 · FREE

Stress and elastic strain

Your goal: Interpret a linear-elastic teaching model.

Understand the idea

In uniaxial linear elasticity, strain equals stress divided by elastic modulus. Strain is dimensionless, while stress and modulus need compatible units. Plasticity, temperature effects and directional behavior may invalidate the simple relation. It does not establish allowable service loading.

Worked example

At 100 MPa stress and supplied E = 200,000 MPa, strain is 0.0005, or 0.05 percent, under the linear-elastic assumption.

Try it yourself

Use 50 MPa and E = 100,000 MPa. Find strain as a percentage.

Is elastic modulus the same as yield strength?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 3: Tests and scatter →

LESSON 3 / 3 · FREE

Tests and scatter

Your goal: Treat measurements as evidence with conditions and variation.

Understand the idea

A material datasheet value comes from a test and specimen under stated conditions. Compare loading direction, temperature, processing and test method. A mean from a few specimens is not a guaranteed minimum for all production parts; uncertainty and acceptance criteria require separate treatment.

Worked example

Three fictional density measurements of 2.6, 2.7 and 2.8 g/cm³ average 2.7 g/cm³. The spread remains relevant.

Try it yourself

Find the mean of measured values 190, 200 and 210.

Does a sample mean guarantee every part exceeds it?

Background reference ↗ · Original teaching text and fictional practice values.

Choose your next step →

Finish with evidence of your understanding.

Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.

Practice progress is a study aid, not a professional qualification or proof of field competence.

Continue in Materials Science & Metallurgy

Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.

Open the full studio → · Choose another discipline →

About this introductory course

These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.

Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.