START WITH THE FOUNDATIONS

Mechatronics Foundations

Follow energy, sensing and control across an electromechanical system.

Free · No sign-in required3 lessonsWorked examples & practiceBeginner

0 of 3 lessons checked · Progress is saved in this browser.

  1. 01 / SYSTEM VIEWSensor
  2. 02 / SYSTEM VIEWController and drive
  3. 03 / SYSTEM VIEWMechanical load

This map connects the course ideas; it is not a detailed engineering schematic.

LESSON 1 / 3 · FREE

System interfaces

Your goal: Identify both energy and information paths.

Understand the idea

Mechatronics combines mechanical behavior, electrical actuation, sensing and computation. A control signal does not supply all actuator power. Explicit interfaces help distinguish a measurement fault from a drive fault or mechanical restriction. Boundaries should state units and direction.

Worked example

A fictional actuator consumes 100 W and supplies 70 W mechanical output at one operating point. That point efficiency is 70 percent.

Try it yourself

With 200 W input and 150 W mechanical output, find point efficiency.

Is a low-power command wire necessarily the motor’s energy supply?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 2: Encoder scaling →

LESSON 2 / 3 · FREE

Encoder scaling

Your goal: Convert a supplied encoder count scale into angle.

Understand the idea

An encoder produces counts related to position under a defined counting convention. Counts per revolution must specify whether edge multiplication or gearing is included. Scale mistakes can survive communication checks and create incorrect displayed motion.

Worked example

With a supplied effective 1,000 counts/revolution, 250 counts represent 90 degrees. The effective count scale already includes the chosen decoding convention.

Try it yourself

At effective 2,000 counts/revolution, what angle is 500 counts?

What must the count scale specify?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 3: Transmission tradeoffs →

LESSON 3 / 3 · FREE

Transmission tradeoffs

Your goal: Relate an ideal gear ratio to output speed.

Understand the idea

A reduction gear lowers output speed while changing torque according to power and losses. Real drives also have backlash, inertia and mechanical limits. Define whether a ratio means input speed divided by output speed before calculating; conventions must not be guessed.

Worked example

For a supplied 10:1 reduction defined as input/output speed, 1,000 rpm input produces 100 rpm ideal output.

Try it yourself

At 1,200 rpm input through a supplied 20:1 reduction, find output speed.

Does a speed ratio alone establish output torque capacity?

Background reference ↗ · Original teaching text and fictional practice values.

Choose your next step →

Finish with evidence of your understanding.

Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.

Practice progress is a study aid, not a professional qualification or proof of field competence.

Continue in Mechatronics

Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.

Show 1 more available resources

Open the full studio → · Choose another discipline →

About this introductory course

These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.

Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.