Battery Capacity and Energy: 12 V, 5 A for 2 Hours
A 12 V battery supplying a 5 A DC load for 2 hours, with a coulomb counter and a watt-hour meter reading 10 Ah (36,000 C) and 120 Wh (0.120 kWh), a series shunt for current sensing, and the capacity, charge and energy relationships.
Read the free drawing guide ↓How to read this drawing
Ampere-hours measure electric charge; watt-hours measure energy. Reading both quantities together explains why two batteries with the same ampere-hour rating can store different amounts of energy when their voltages differ. This drawing introduces that distinction using a constant DC load.
Follow the relationships
- Start with the battery voltage, then follow the load current and its duration. An ammeter or series shunt measures current in the circuit; a voltage measurement is taken across the relevant terminals.
- Multiply current by elapsed hours to calculate charge in ampere-hours. Multiplying by 3,600 converts ampere-hours to coulombs. Keep that result separate from energy: voltage times ampere-hours gives watt-hours only under the assumed constant-voltage conditions.
- Compare the charge and energy counters. A watt-hour meter integrates power over time, so changing voltage or current requires integration rather than one constant product. A capacity label alone does not describe the whole operating cycle.
Constant-load example
At an assumed constant 12 V and 5 A for 2 hours, charge is 5 × 2 = 10 Ah, or 36,000 C. Power is 12 × 5 = 60 W, and energy is 60 × 2 = 120 Wh = 0.120 kWh. The example compares units; it does not establish that a real 10 Ah battery can supply that load for two hours.
Use and limitations: Actual usable runtime depends on battery chemistry, discharge rate, temperature, age, cutoff voltage and conversion losses. Use manufacturer discharge data and the applicable system requirements for equipment selection.
Public reading guide updated . The full-size drawing requires All-Access.