START WITH THE FOUNDATIONS

Smart Building Foundations

Trace points, sequences and measured energy through connected building controls.

Free · No sign-in required3 lessonsWorked examples & practiceBeginner

0 of 3 lessons checked · Progress is saved in this browser.

  1. 01 / SYSTEM VIEWBuilding point
  2. 02 / SYSTEM VIEWControl sequence
  3. 03 / SYSTEM VIEWMeasured result

This map connects the course ideas; it is not a detailed engineering schematic.

LESSON 1 / 3 · FREE

Points, units and context

Your goal: Define a building-system point before using its value.

Understand the idea

A point may be an input, output, calculated value or status. Record its units, location and meaning. A temperature reading without sensor location or timestamp can be misinterpreted, and a network integration cannot repair incorrect underlying scaling.

Worked example

Three fictional temperature sensors report 20, 22 and 24 °C at equally weighted comparable locations. Their simple mean is 22 °C, not necessarily an occupied-zone average.

Try it yourself

Find the mean of comparable readings 21, 23 and 25 °C.

What belongs with a point name?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 2: Deadbands and sequences →

LESSON 2 / 3 · FREE

Deadbands and sequences

Your goal: Understand a supplied control sequence without adopting its values as recommendations.

Understand the idea

A sequence describes what the controls should do under defined conditions. Deadbands can keep opposing actions apart, but exact setpoints depend on the system and approved sequence. Separate a command from proof that the physical device responded.

Worked example

A fictional sequence has heating below 20 °C and cooling above 24 °C, leaving a 4 K interval. These numbers illustrate a deadband, not comfort recommendations.

Try it yourself

For supplied thresholds of 19 and 23 °C, calculate their separation.

Does an open command prove a valve is physically open?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 3: Energy comparisons →

LESSON 3 / 3 · FREE

Energy comparisons

Your goal: Normalize the comparison boundary before claiming savings.

Understand the idea

Compare energy over compatible periods and account for changes in occupancy, weather and operation. A raw reduction is an observation; attributing it to a control change requires evidence. Power and energy must not be mixed, and comfort or service performance should remain part of the evaluation.

Worked example

A supplied period uses 900 kWh versus a 1,000 kWh baseline. The raw reduction is 10 percent before normalization or causal attribution.

Try it yourself

Usage falls from a supplied 500 kWh baseline to 450 kWh. Find raw percentage reduction.

Does a raw before/after drop prove a particular control caused it?

Background reference ↗ · Original teaching text and fictional practice values.

Choose your next step →

Finish with evidence of your understanding.

Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.

Practice progress is a study aid, not a professional qualification or proof of field competence.

Continue in Smart Buildings

Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.

Show 7 more available resources

Open the full studio → · Choose another discipline →

About this introductory course

These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.

Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.