Water-treatment pilot · Self-paced virtual instructor

Water Treatment: Follow a Drop

Follow your virtual instructor through a drinking-water plant, from intake to distribution. Start the walkthrough below, then explore or test your understanding.

Beginner · Six teaching stops20–30 minutes suggestedIncluded with All-Access
About this training · outcomes & six-stop route

What you will practise

  • Trace screening, mixing, settling, filtration, disinfection contact and storage in a connected 3D plant.
  • Connect the equipment location to the flow, level and differential-head readings.
  • Explain why a running motor or a single analyzer reading cannot establish successful treatment.
  • Gather evidence for a filter-resistance diagnosis and compare the virtual restoration.

No previous plant experience is required. Familiarity with basic flow and pressure units helps. This fictional model does not assess water safety, regulatory compliance or real operating procedures.

Your six-stop route

  1. 1 · Raw-water intake

    Screens intercept large debris. Raw-water pumps lift water to the treatment train. This fictional plant treats surface water; it is not a wastewater plant.

  2. 2 · Coagulation & flocculation

    Rapid mixing disperses coagulant. Slower paddle mixing encourages particles to form flocs. Dose depends on source-water conditions and testing, not a universal setting.

  3. 3 · Sedimentation

    Gravity separates settleable floc. A scraper collects sludge, while clarified water passes over an outlet weir. Sludge goes to residuals handling.

  4. 4 · Granular filtration

    Two parallel media cells remove remaining particles. Differential head indicates resistance. Backwash removes accumulated solids; one cell can remain in service.

  5. 5 · Disinfection contact

    Disinfectant is introduced before a baffled contact basin. Effective contact depends on hydraulics and water chemistry. This model does not calculate pathogen inactivation or regulatory CT compliance.

  6. 6 · Clearwell & distribution

    The clearwell buffers treated-water demand. Duty/standby pumps deliver water to a conceptual distribution header; level, flow and pressure instruments support control.

References & related training

For background on conventional treatment stages, see CDC: How Water Treatment Works. The lesson’s process layout and numerical signals are fictional teaching models.

Show or hide the instructor, use Meet the 3D instructor for a closer view, or return to the lesson camera. Listen to the recorded Cedar narration or follow the full transcript. Correct knowledge checks and your last lesson stop are saved only in this browser; the original inspector shares the same progress.

Environmental & Water Resources Studio · SCADA & instrumentation · All instructor-led training

This is scripted virtual instruction, not a live teacher or AI conversation. The continuous six-step walkthrough moves the instructor between teaching locations and begins each explanation on arrival. Transits are illustrative and time-compressed, not validated access routes. Alex’s Cedar narration is AI-generated. Recordings play on demand; the full written lesson remains available.