Identify detection, control and notification functions using conceptual examples.
Free · No sign-in required3 lessonsWorked examples & practiceBeginner
0 of 3 lessons checked · Progress is saved in this browser.
01 / SYSTEM VIEWDetection
02 / SYSTEM VIEWControl panel
03 / SYSTEM VIEWNotification
This map connects the course ideas; it is not a detailed engineering schematic.
LESSON 1 / 3 · FREE
Signals and system roles
Your goal: Distinguish detection, control and notification.
Understand the idea
An initiating device reports a condition to a control unit; a notification appliance communicates a warning. A fault or supervisory condition is not interchangeable with a fire alarm. Interfaces may control other systems, but required behavior depends on the building, adopted rules and approved design.
Worked example
In a fictional zone, six detectors each report to the control panel, which commands four notification appliances. Counting ten devices does not mean ten detectors.
Try it yourself
A training drawing shows eight detectors and five notification appliances. How many devices are shown in total?
Your goal: Recognize why circuit loading affects delivered voltage.
Understand the idea
A cable’s resistance causes voltage drop when current flows. An illustrative DC circuit uses ΔV = IR, where R is the full current path resistance. Actual system calculations require compatible device data, circuit topology and manufacturer/adopted requirements. A nominal supply value is not the voltage at every appliance.
Worked example
At 0.8 A through 2 Ω total loop resistance, drop is 1.6 V. A 24 V assumed source then leaves 22.4 V before other losses; these are teaching values.
Try it yourself
At 1.2 A and 2 Ω total loop resistance, find voltage drop.
Your goal: Distinguish nominal charge from a complete battery selection.
Understand the idea
Ampere-hours express charge capacity at stated conditions. A simplified charge budget multiplies current by time, then adds operating stages. Real battery selection also involves temperature, aging, discharge characteristics, charger compatibility and required margins. A teaching subtotal is not a compliant battery size.
Worked example
A fictional 0.1 A standby stage for 10 h uses 1 Ah; a 0.5 A stage for 0.2 h uses 0.1 Ah. The subtotal is 1.1 Ah before real selection factors.
Try it yourself
For a supplied 0.2 A load over 5 h, calculate the simple charge requirement.
Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.
Practice progress is a study aid, not a professional qualification or proof of field competence.
Continue in Fire Alarm
Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.
These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.
Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.