Distinguish loads, air delivery and heat-pump performance before choosing equipment.
Free · No sign-in required3 lessonsWorked examples & practiceBeginner
0 of 3 lessons checked · Progress is saved in this browser.
01 / SYSTEM VIEWRoom load
02 / SYSTEM VIEWAir and refrigerant
03 / SYSTEM VIEWHeat outdoors
This map connects the course ideas; it is not a detailed engineering schematic.
LESSON 1 / 3 · FREE
Heat gain versus equipment capacity
Your goal: Separate a room load estimate from an equipment rating.
Understand the idea
A load is a rate of heat gain or loss under stated conditions. Capacity is what equipment can deliver under its rating or operating conditions. Solar gains, people, ventilation and the envelope contribute differently; latent moisture load is separate from sensible temperature change.
Worked example
A fictional room has 2.0 kW envelope gain, 0.8 kW people/equipment gain and 1.2 kW ventilation gain. The illustrative total is 4.0 kW, not an equipment selection.
Your goal: Calculate average duct velocity from a supplied airflow.
Understand the idea
Supply air transports energy, but airflow and cooling capacity are not interchangeable quantities. For a fixed air volume flow, mean velocity is flow divided by duct area. Distribution also depends on pressure losses, balancing, leakage and terminal behavior.
Worked example
At 0.6 m³/s through 0.2 m², mean velocity is 3 m/s. Doubling area at the same flow halves velocity. This calculation does not size a fan or establish acceptable noise.
Try it yourself
A duct carries 0.8 m³/s through 0.2 m². Find mean velocity.
Your goal: Interpret a heat-pump coefficient of performance.
Understand the idea
A heat pump transfers thermal energy using electrical work. Heating COP is heat delivered divided by electrical input at specified conditions. It can exceed one because heat is moved from another source; it is not a claim of creating energy. Seasonal metrics and point COP describe different conditions.
Worked example
A unit delivering 9 kW of heat from 3 kW electrical input has heating COP = 3. In a simplified steady balance, the remaining 6 kW comes from the source side.
Try it yourself
A heat pump delivers 12 kW of heating while using 4 kW of electricity. Find COP.
Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.
Practice progress is a study aid, not a professional qualification or proof of field competence.
Continue in HVAC
Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.
These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.
Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.