START WITH THE FOUNDATIONS

Mechanical Engineering Foundations

Follow forces, rotating power and fluid flow through simple mechanical systems.

Free · No sign-in required3 lessonsWorked examples & practiceBeginner

0 of 3 lessons checked · Progress is saved in this browser.

  1. 01 / SYSTEM VIEWLoad
  2. 02 / SYSTEM VIEWTransmission
  3. 03 / SYSTEM VIEWUseful motion

This map connects the course ideas; it is not a detailed engineering schematic.

LESSON 1 / 3 · FREE

Forces and free-body diagrams

Your goal: Separate applied forces from the resulting acceleration.

Understand the idea

Choose one object as your system and draw only the external forces acting on it. Opposing forces must be combined with signs before applying Newton’s second law. Constant velocity means zero net force, not necessarily zero applied force. Mass and weight have different units.

Worked example

A 20 kg cart is pulled with 80 N against 20 N resistance. Net force is 60 N, so a = 60/20 = 3 m/s². This example treats the cart as a particle and resistance as constant.

Try it yourself

A 25 kg cart has 100 N forward force and 25 N resistance. What is its acceleration?

What belongs on the cart’s free-body diagram?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 2: Torque and rotating power →

LESSON 2 / 3 · FREE

Torque and rotating power

Your goal: Connect shaft torque, speed and power without confusing them.

Understand the idea

Torque measures the turning effect about an axis. Power is the rate of energy transfer. A shaft can carry high torque at low speed without delivering high power. Convert revolutions per minute to radians per second before using P = Tω.

Worked example

At 60 N·m and 1,000 rpm, ω = 2π × 1000/60 = 104.72 rad/s. Shaft power is 6.28 kW. Bearings, drive efficiency and duty are outside this ideal shaft balance.

Try it yourself

A shaft carries 50 N·m at 120 rad/s. What power does it transmit?

At the same shaft power, reducing speed requires what?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 3: Flow and continuity →

LESSON 3 / 3 · FREE

Flow and continuity

Your goal: Predict velocity changes when a pipe area changes.

Understand the idea

Volume flow rate is the volume crossing a section per unit time. For steady incompressible flow without branches, Q = Av at every section. A smaller area raises velocity at the same flow; it does not by itself establish the pump operating point or pressure loss.

Worked example

A 0.004 m³/s flow through 0.002 m² gives v = 2 m/s. Halving the area to 0.001 m² gives 4 m/s if flow remains fixed. Real pumping systems may change flow as resistance changes.

Try it yourself

At Q = 0.006 m³/s and A = 0.002 m², calculate mean velocity.

Which assumption supports equal volume flow at two sections?

Background reference ↗ · Original teaching text and fictional practice values.

Choose your next step →

Finish with evidence of your understanding.

Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.

Practice progress is a study aid, not a professional qualification or proof of field competence.

Continue in Mechanical

Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.

Show 94 more available resources

Open the full studio → · Choose another discipline →

About this introductory course

These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.

Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.