START WITH THE FOUNDATIONS

SCADA & Controls Foundations

Trace measurements, control decisions and actuator responses through a feedback loop.

Free · No sign-in required3 lessonsWorked examples & practiceBeginner

0 of 3 lessons checked · Progress is saved in this browser.

  1. 01 / SYSTEM VIEWSensor
  2. 02 / SYSTEM VIEWController
  3. 03 / SYSTEM VIEWActuator and process

This map connects the course ideas; it is not a detailed engineering schematic.

LESSON 1 / 3 · FREE

Signals and engineering units

Your goal: Convert a supplied linear measurement signal to a process value.

Understand the idea

A sensor and transmitter turn a physical quantity into a signal the controller can interpret. Scaling needs a defined low endpoint, high endpoint and fault behavior. A displayed number can be wrong even when communication works if the units or scaling are incorrect.

Worked example

For an illustrative 4–20 mA transmitter scaled 0–100 kPa, 12 mA is halfway through the 16 mA span, so the value is 50 kPa.

Try it yourself

For that same supplied scale, what pressure corresponds to 16 mA?

Does a valid network packet prove sensor calibration?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 2: Setpoints and error →

LESSON 2 / 3 · FREE

Setpoints and error

Your goal: Define the sign of a control error before interpreting it.

Understand the idea

A setpoint is the requested target and the process value is the measured state. In this lesson error is setpoint minus process value. The controller’s output direction depends on the process and configuration; a positive error does not universally mean opening every valve.

Worked example

With setpoint 60 °C and process value 55 °C, defined error is +5 °C. The actuator action must still be chosen for the particular heating or cooling process.

Try it yourself

Using error = setpoint − process value, calculate error at 50 °C setpoint and 46 °C measured.

Can controller direction be inferred from error sign alone?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 3: Alarms, trends and evidence →

LESSON 3 / 3 · FREE

Alarms, trends and evidence

Your goal: Use time-aligned evidence to distinguish symptoms from causes.

Understand the idea

An alarm reports a configured condition, not necessarily the root cause. Compare measurement trends, commands, feedback and timestamps. Interlocks and protection functions have defined authority; troubleshooting a training example never authorizes bypassing a real protective function.

Worked example

A fictional sample records events at 10:00:00, 10:00:03 and 10:00:08. The total observed interval is 8 seconds; ordering alone does not prove causation.

Try it yourself

A command is timestamped at 20 seconds and feedback at 27 seconds. Find observed delay.

Which is a better causal investigation?

Background reference ↗ · Original teaching text and fictional practice values.

Choose your next step →

Finish with evidence of your understanding.

Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.

Practice progress is a study aid, not a professional qualification or proof of field competence.

Continue in SCADA

Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.

Show 17 more available resources

Open the full studio → · Choose another discipline →

About this introductory course

These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.

Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.