START WITH THE FOUNDATIONS

Environmental & Water Foundations

Use conservation and treatment-stage observations to reason about water systems.

Free · No sign-in required3 lessonsWorked examples & practiceBeginner

0 of 3 lessons checked · Progress is saved in this browser.

  1. 01 / SYSTEM VIEWIntake
  2. 02 / SYSTEM VIEWTreatment barriers
  3. 03 / SYSTEM VIEWStorage and distribution

This map connects the course ideas; it is not a detailed engineering schematic.

LESSON 1 / 3 · FREE

Water balance

Your goal: Check accumulation before attributing a flow difference to an error.

Understand the idea

A tank balance compares inflow, outflow and storage change over the same interval. At steady volume, inflow equals outflow; when volume changes, their difference can be real accumulation. Treatment quality and hydraulic balance are related but separate questions.

Worked example

Over one hour, a fictional tank receives 120 m³ and discharges 100 m³. Storage rises 20 m³ if other flows are absent.

Try it yourself

With 90 m³ inflow and 75 m³ outflow during one interval, find storage increase.

Does equal inflow and outflow prove water quality?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 2: Concentration and removal →

LESSON 2 / 3 · FREE

Concentration and removal

Your goal: Interpret a supplied concentration change within a defined treatment boundary.

Understand the idea

Concentration expresses amount per volume. Percent removal compares inlet and outlet concentrations only when the comparison is suitable for the process and sampling. Flow changes, dilution and timing can affect interpretation. One removal percentage does not prove compliance with all water-quality requirements.

Worked example

A fictional concentration falls from 10 to 2 mg/L. The stated concentration reduction is (10 − 2)/10 = 80 percent.

Try it yourself

For a supplied reduction from 20 to 5 mg/L, calculate percent reduction.

Does one removal percentage establish safe drinking water?

Background reference ↗ · Original teaching text and fictional practice values.

Continue to lesson 3: Nominal retention time →

LESSON 3 / 3 · FREE

Nominal retention time

Your goal: Separate a volume/flow estimate from actual residence-time behavior.

Understand the idea

Dividing vessel volume by flow gives a nominal hydraulic time for a defined steady-flow boundary. Mixing, dead zones and short-circuiting change actual residence behavior. Use this simple ratio to understand scale, not as a verified disinfection-contact or process-performance calculation.

Worked example

A 200 m³ tank at 50 m³/h has nominal volume/flow time of 4 h. That does not mean every parcel remains exactly 4 h.

Try it yourself

Calculate nominal time for 150 m³ at 30 m³/h.

Why can actual residence times vary?

Background reference ↗ · Original teaching text and fictional practice values.

Choose your next step →

Finish with evidence of your understanding.

Explain each worked example in your own words, check the units and identify one assumption that could change the result. Then use the linked labs or roadmap to apply the ideas to a broader task.

Practice progress is a study aid, not a professional qualification or proof of field competence.

Continue in Environmental & Water Resources

Apply these foundations in an available course, lab or roadmap. The linked resource’s access rules still apply.

Show 25 more available resources

Open the full studio → · Choose another discipline →

About this introductory course

These original lessons use simplified models and explicitly supplied practice values. Calculations teach concepts; they do not select real equipment, establish code compliance or authorize field work. Follow the linked references and advanced resources for deeper study.

Updated · Study progress stays in this browser. There is no certificate or paid gate for these lessons.