The 12-template downloadable kit behind every document this program has referenced by name — points lists, sequences of operation, integration and hardening checklists, commissioning and energy calculation sheets, and project closeout records — and how each one is actually used on a real project.
A smart buildings engineer's actual deliverable is rarely just a working control sequence — it is the record proving a specific setpoint decision, point mapping, or commissioning test result was made and verified deliberately, so a technician, a controls contractor, or an auditor can trust the system without re-deriving every decision from scratch. This module collects the twelve templates referenced throughout Modules 1 through 18 — a Points List Template, a Sequence of Operations Template, a BACnet Integration Checklist, a Commissioning Functional Test Checklist, an Energy Baseline/M&V Calculation Sheet, a Fault Detection Rule Set Template, a Cybersecurity Hardening Checklist, a Network Architecture Checklist, an RFI Template, a Punch List Template, an As-Built Checklist, and an O&M Manual Outline — organized into three groups that follow a real project's timeline.
Each template is explained here in terms of what it is for and how it is actually used across this program's five real projects, not reproduced as a blank form — the templates themselves are separate downloadable PDF files. Module 21's closing review draws on this same full curriculum.